A7K Air Ozone Generator

Regular price: ¥1,969.82
Sale price: ¥1,969.82
Regular price: ~~¥2,121.96~~
Unit price: per

Shipping calculated at checkout.

Plug Type

Quantity must be 1 or more

A7K is a high concentration ozone generator, to remove odors, viruses, and mold from the air.

The 7 g/h A7K Air Ozone Generator is an effective odor remover; It is a powerful shock treatment application. Please use caution to remove all people, pets, and plants from the room while in use.

With this unit, the ozone concentration can reach 2 ppm in 1 hour in a 100 square foot room.

There are double plates inside the unit. You can select one plate or two, so the ozone output is 3.5g/h or 7g/h. If the environment is not too bad, you can choose only 1 plate runs and set the timer to 30 mins. You need to make sure the room is sealed completely.

The model is also with remote control.

Features and Benefits

Corona Discharge Technology: Save money and get more efficient ozone production vs ultraviolet ozone production.

Lightweight and Portable: At a weight of just over 6 kg, use the stainless steel handle to transport the A7K from room to room.

Reliable: Enjoy sturdy, well-crafted machinery, built to last for years.

Reusable / Replaceable Plates: Clean plates with a razor in between replacement. Replace every two years or 2000 hours.

Single or Dual Plate Activation: Choose between a single plate of 3500 mg/hour to freshen up an area, or 7000 mg/hour for tougher issues.

Remote Control Operable: Use the remote control in order to be prepared to exit the room quickly.

Adjustable timer with Optional 12 and 24-hour Repeat Timer Settings: Do another treatment before coming back to the area. Ensure that your odors are cleared.

Three Fan Speeds to Match Area: Raise the fan to high if the room is large, and keep the fan setting on low or medium if the room is small.

How It Works

**Please keep in mind, this is a very powerful unit. No people, pets, or plants should be in the room when the A7K is running.**

Plug the A7K power cord into the back of the unit and the wall socket.
Push the power button on the back of the unit.
Push the power button on the front of the unit.
Push repeat cycle option on or off (see below for “Operating timer with repeat cycle”).
When the repeat cycle LED light is off, the unit will not run another ozone treatment.

Select O₃ plate selection options:

Push the button one time for Plate 1
Push again for Plate 2
Push again for both plates
Push again for no plates

Choose fan speed:

L - for Low

M - for Medium

H - for High

Select the timer option: 30 minutes, 1 hour, 2 hours or 4 hours

Let room sit for at least 2-4 hours after treatment.

Please Note: In case of exposure, remove to fresh air. If inhaled, ozone can damage the lungs.

Please note: Keep away from natural gas, oil, gasoline, or other flammable chemicals as it could be an extreme fire hazard.

Technical Specifications

Voltage:	220/240 or 110 VAC
Fan Setting Power:	95W, 98W, 100W
Ozone Output:	3500 mg/hour to 7000 mg/hour
Timer Settings:	30 minutes, 1-hour, 2-hours, 4-hours
Air Flow Rate	50, 100, 150 CFM
Dimensions:	38 x 20 x 36 cm; (10x5x11 inches)
Weight:	6.22 kg; (13 pounds)

Applications

Clean stubborn odors
Repel insects
Basement cleaning
Kitchen cleaning
Hotel rooms
Doctor and Dentist offices
Mold/mildew treatment
Removes odors such as onion, spices, burned oil
Removes stubborn cigarette smoke odor
Kills bacteria and removes pollen in the air

Back to Air-Series